Wednesday, August 28, 2013

Clean The Volcano Vaporizer

The Volcano Vaporizer is designed to extract flavor and active ingredients from plants. These ingredients are then released into trapped air, which can be inhaled. The Volcano Vaporizer system says this practice can help to relieve stress. The filling chamber and the cap of the Volcano Vaporizer need to be cleaned regularly, especially when being used by two or more people.


Instructions








1. Allow the Volcano Vaporizer unit to cool completely.








2. Remove the cap from the base of the unit by pulling it straight up and off the machine.


3. Use the included cleaning brush to push the small screen or filter out of the cap. There also will be a cap cylinder and a ring. Pay attention to how these pieces fit together so that you can reassemble them later.


4. Wipe all of the pieces of the cap with a cotton cloth moistened with ethyl alcohol to kill any germs on the parts.


5. Remove the screen from the filling chamber. This can be done by pushing the screen from underneath the filling chamber so that it comes out the top. Wipe this screen with ethyl alcohol as well.


6. Wipe down the filling chamber with the cotton cloth to remove any remaining residue. Reassemble the vaporizer.

Tags: Volcano Vaporizer, filling chamber, with ethyl alcohol, cotton cloth, ethyl alcohol