Advocates of colloidal silver claim this miracle elixir can cure anything from the common cold to more serious problems, such as cancer. This liquid is made with a colloidal-silver generator that sends volts, usually between 25 volts and 30 volts, through silver wire, which is then dispersed into , thus creating a very diluted form of liquid silver. Since the generator does most of the work, making a colloidal silver solution is about as easy as steeping a bag of tea in hot water.
Instructions
1. Fill a glass with 8 oz of distilled water. The glass must be taller than the length of the silver wires of the generator.
2. Submerge the silver wires in the distilled water. Make sure the wires are spaced at least 1 inch apart from each other.
3. Turn on the generator. Depending on your generator, the location of the power switch may differ. Also, electric-powered generators must be plugged into an electrical outlet before you can turn it on.
4. Leave the wires in the water until small bubbles begin to form on the sides of the glass, usually between 20 and 30 minutes.
5. Turn off the generator and remove the wires. The colloidal silver solution can now be taken in your desired dose.
Tags: colloidal silver, distilled water, silver solution, silver wires, Turn generator, usually between