A circular polarizing filter works by changing the beams of polarized light that enter your camera’s lens when you’re taking a photograph. Polarized light enters the lens directly in certain situations, creating glare or reducing the natural color in a picture. When a circular polarizer is on your lens, you can rotate it back and forth to block the direct beams of polarized light, giving you a better photograph in outdoor lighting shots.
Instructions
1. Choose a circular polarizer by looking at the size of
2. Attach the circular polarizing filter to your lens and head outside on a sunny day. The best way to learn use the filter is to experiment with it. Reflections on water and clouds against a blue sky make two good learning situations.
3. Point your camera towards a reflection in the water and look through the viewfinder. With the hand that you do not use to depress the shutter, slowly turn your circular polarizer 90 degrees. Notice if portions of the shot darken slightly. If there is a lot of bright sun, it may be difficult to witness the change in the viewfinder, so take one shot each of each position to study later when you are indoors.
4. Change your position in relation to the reflection. This is often the most confusing aspect for a new user of a circular polarizer. When you understand that the polarized beams of light are reflecting in a specific direction, due to the angle of the sun, you will begin to see that knowing where to stand to get the shot is the key.
5. Try an easy trick when learning where to stand in relation to the sun’s rays. Hold
6. Take more practice shots of the reflection from the designated spots and view them indoors to see the difference. Use that technique anytime the sun is shining and you want to reduce reflections with your circular polarizer.
Tags: